Pos Manual

How to set up Card Terminal

When setting up a new card terminal you will need following 3 things:

• Terminal
• Charger
• Adaptor for the Ethernet cable

Sequence
1. Open the back side of the terminal and plug in the adaptor.

2. Connect the charger with the adaptor.

3. Make sure to plug in the Ethernet cable in the ETH-port on the adaptor.

4. Open settings by pressing 9+Green (at the same time) and enter the password 0856.

5. Press network → Select Ethernet → Enable DHCP → Scroll down and press apply.

6. Press the red button to exit → Press board on the terminal → Scroll down and select store → Press confirm and wait for the terminal to synchronize.

7. Go to settings and press 9+Green → Use same password.

8. Press network and select Ethernet → Make sure DHCP is not activated.

9. Edit the IP Address → Delete the last 3 digits (so there are 6) and replace the deleted digitswith number 10 for the first terminal number 11 for the second terminal and so forth.

10. Press green to save the configuration.

11. Go back to the main screen by pressing red two times.

12. Press menu on the POS → Press settings → Choose CC Terminals → Enable EOD → Press add (+) and choose Adyen API terminal.

13. Press 5+green on the terminal → Take the iPad and scan the terminal QR-code.

14. Press confirm to make the iPad log-in and secure that the terminal is found and log-in succeeded.

15. Make a sample transaction to check if the terminal is connected and working.