E-Campus

Back

FETCO's CBS 1221 - Settings

‍

FETCO's Brewer Internal Settings

‍

‍

FETCO's CBS 1221 - Programming

Full Hot Batch

‍

How to program the FETCO's for a Full Hot Batch:

Turn off brewer at rear wait 10 seconds and turn back on
STOP button will be red- Press quickly to enter program mode
Batch program A will appear on screen
Press BUTTON 1 - BREW VOLUME A1 will appear on screen
Press BUTTON 1 to scroll through menu and set as list below

‍

1. Brew Volume - 3.0 lts
2. Brew Time - 4:00
3. Pulses – 12
4. Prewet percent – 12%
5. Prewet delay – 1:00
6. Bypass % - 0
7. Drip delay – 1:00

‍

Then press STOP and next program A2 will appear on display
Then press STOP and next program A3 will appear on display
Then press STOP- copy batch will appear- Press STOP
Press STOP again until EXIT appears
Press BUTTON2 so display says EXIT- YES
Press BUTTON1
Press BUTTON1 to SAVE
The brewer should be back to operation mode now

‍

‍

MAHLKONIG EK 43 Grinder - Settings

‍

Coarse Adjustment

By moving the dial towards bigger numbers (coarser) this will allow water to pass through the ground coffee at a faster rate which will result in a weaker watery flavour

*No.7 should be a starting point for a grind setting

‍

Fine Adjustment

By moving the dial towards smaller numbers (finer) this will allow water to pass through the ground coffee at a slower rate which will result in a stronger flavour with more body present