Programming

‍

LA MARZOCCO LINEA PB

‍

How to programming the water volumetric:

‍

‍

Step 1

1. Always start with left group head
2. Remove portafilter and purge some water
3. Places scales on drip tray under group head with a purple cup in position to catch water when released
4. Zero set the scale
5. Longhold the spiral button until group dose settings displays on screen then let go
6. Pressspiral button again
7. Programme dose will display
8. Pressspiral button again
9. Press “enter to exit” will display
10. You now want to programme the water volume
11. Press double shot button and watch scale weight
12. When scale reads 60g (60ml) press double shot button to stop water
13. Scale should show 65g (65ml) --> This is the ideal amount

*If not in range --> restart the scale and repeat process by pressing double shot button to achieve required volume*

Step 2

1. Now time to copy dose from group head one across to other groups
2. Pressspiral button- *programme volume dose* will show
3. Press double shot button until *copy dose* shows
4. Press spiral button
5. Press button *to copy* will show
6. Press double shot button on left group
7. Press double shot button on right group to copy left group setting to right
8. Press spiral button *copy dose* will show on screen
9. Press double shot button to work through the menu until *group dose exit* shows
10. Press spiral button to enter and *group dose settings* will show
11. Keep pressing double shot button to work through menu until *exit menu* shows
12. Press spiral button then process is complete

Then press double shot button on left group and right group. The time on display should say the same 7 – 8 seconds

‍

Programming Video